How to make cable tv

The development of digital technology has made it possible to watch cable television through a computer. To do this, you need to purchase special equipment and make some settings.

You will need

• - fiber optic cable;

• - subscriber box;

• - TV tuner.

Instruction manual

1

First purchase a TV tuner and set-top box. They have two types of signal: digital and analog, which are reproduced through Windows Media Center and become only analog.

2

First, connect the TV tuner and set-top box via the splitter to the network, since all signal sources must be powered. Install a voltage rectifier to eliminate power outages. Also install an APS station to prevent an emergency shutdown, as this will damage the settings.

3

Connect the cable from the TV tuner or set-top box to a personal computer with the Windows Media Center application. When laying the cable, pay attention to its location. Stack it to avoid damage. If you have several computers on which you want to watch television, then you need to connect a TV tuner and a set-top box to each.

4

Now connect the infrared transmitter that comes with the TV tuner to the set-top box and to the computer. It also has a remote control. The transmitter will automatically install the necessary drivers. For full operation, restart your personal computer.

5

Go to the "Start" and select "Run." Next, find the “TV Signal Settings” command and program the system on various channels. You will be able to adjust the clarity of the "caught" channel and sound quality. You can also save all the channels in memory under the digital values ​​convenient for you.